Installing The 10 Gbe Mezzanine Card - Dell PowerEdge C8000 Hardware Owner's Manual

Figure 3-73. Removing and Installing the 10 GbE Mezzanine Card
1 10 GbE mezzanine card
3 mezzanine card bridge board
connector
5 SFP + port 0

Installing the 10 GbE Mezzanine Card

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Align the 10 GbE mezzanine card with the screw holes on the bracket. See
Figure 3-73.
2 Replace the three screws securing the 10 GbE mezzanine card to the
bracket. See Figure 3-73.
3 Install the mezzanine card bridge board into the mezzanine slot on the
10 GbE mezzanine card. See Figure 3-72.
236
Installing System Components
5
4
Many repairs may only be done by a certified service technician. You
3
2 screws (3)
4 SFP + port 1
1
2