1 Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 161 or "Removing the Sled Cover" on page 166.
3 Remove the two screws securing the Infiniband mezzanine card assembly
to the sled tray. See Figure 3-68.
4 Lift the Infiniband mezzanine card assembly out of the sled tray. See
Figure 3-68.
Figure 3-68. Removing and Installing the Infiniband Mezzanine Card Assembly
1
screws (2)
5 Remove the screw securing the mezzanine card bridge board to the
bracket. See Figure 3-69.
6 Pull the mezzanine card bridge board away from the mezzanine slot. See
Figure 3-69.
230
Installing System Components
2
Infiniband mezzanine card assembly