System Battery; Removing The System Battery - Dell PowerEdge C8000 Hardware Owner's Manual

System Battery

Removing the System Battery

WARNING:
installed. Replace the battery only with the same or equivalent type recommended
by the manufacturer. See your safety information for additional information.
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 141.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 161 or "Removing the Sled Cover" on page 166.
3 Locate the battery socket on the system board. See "System Board
Connectors" on page 279.
CAUTION:
connector while installing or removing a battery.
4 Press the "-" side of the battery outward to allow the battery to pop out
from the socket.
5 Lift the battery out of the connector. See Figure 3-82.
Figure 3-82. Removing and Installing the System Battery
1 system battery
252
Installing System Components
There is a danger of a new battery exploding if it is incorrectly
Many repairs may only be done by a certified service technician. You
To avoid damage to the battery connector, you must firmly support the
2 connector