Dell PowerEdge C8000 Hardware Owner's Manual page 109

Table 2-1. D4 Token Table
Token Setup Option
0260 Advanced ECC
Mode
026A Coherent HT
Link Speed
026B Coherent HT
Link Speed
026E Active Processor
Cores
026F Active Processor
Cores
0270 Active Processor
Cores
0271 Active Processor
Cores
0272 Active Processor
Cores
027B HT Assist
027C HT Assist
02A1 C1E State
02A2 C1E State
(continued)
Description
Selects Advanced ECC (i.e. Lockstep, Chipkill) as the
memory operating mode.
Sets to support HyperTransport 1 specification.
Sets to support HyperTransport 3 specification.
This field controls the number of enabled all of cores
in each processor. By default, the maximum number
of cores per processor will be enabled.
This field controls the number of enabled 6 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
This field controls the number of enabled 8 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
This field controls the number of enabled 10 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
This field controls the number of enabled 12 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
Disables the Probe Filter chipset option in the System
setup. There are some applications that may lower
chipset performance when this is enabled.
Enables the Probe Filter chipset option in the System
setup. There are some applications that may lower
chipset performance when this is disabled.
Enables the processor Enhanced Halt (C1E) state.
(default)
Disables the processor C1-E state. Do at your own
risk. When you disable this option, a warning appears
in the BIOS Setup help text and a pop up message
appears when this option is changing.
Using the System Setup Program
109