Dell PowerEdge C8000 Hardware Owner's Manual page 167

Figure 3-26. Disconnecting and Connecting the Emergency Throttling Cable
1 emergency throttling cable 2 node power distribution board
3 Locate the retaining clip in the back of the sled, and then release the
retaining clip holding the emergency throttling cable. See Figure 3-27.
4 Remove the four screws securing the cover to the sled tray. See Figure 3-27.
5 Lift up the cover, and then turn it over.
6 Disconnect all cables from the sled tray. See Figure 3-27.
167
Installing System Components