Troubleshooting A Damaged Enclosure - Dell PowerEdge C8000 Hardware Owner's Manual

8 Reinstall all server enclosure components. See the PowerEdge C8000
Systems Hardware Owner's Manual for more information.
9 Reinstall the sled components you removed in step 5.
10 Close the sled. See "Installing the Front and Back Sled Covers" on
page 165 or "Installing the Sled Cover" on page 168.
11 Reinstall the sled. See "Installing a Sled" on page 142.
12 Reconnect the server enclosure to the electrical outlet or the PDU.
13 Turn on the sleds and attached peripherals.
14 If the system fails to start, see "Getting Help" on page 289.

Troubleshooting a Damaged Enclosure

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the sleds and attached peripherals.
2 Disconnect the enclosure from the electrical outlet or the PDU.
3 Ensure that the following components are properly installed in the
enclosure:
• Power sleds
• Fan modules
• Sleds
4 Ensure that the following components are properly installed in the sled:
• SD card reader
• Power distribution board
• Internal hard-drives
• Interposer extender
• Mezzanine card
• GPGPU card
264
Troubleshooting
Many repairs may only be done by a certified service technician. You