Rip Route Redistribution Configuration; Open Shortest Path First Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

RIP Route Redistribution configuration

The following table describes the RIP Route Redistribute commands.
Table 130 RIP Redistribute commands
Command
redistribute
{fixed|static|ospf|eospf} <1-32>
no redistribute
{fixed|static|ospf|eospf} <1-32>
redistribute
{fixed|static|ospf|eospf} export
metric <1-15>
show ip rip redistribute

Open Shortest Path First configuration

The following table describes the basic Open Shortest Path First (OSPF) commands. The following sections
provide more detailed information and commands.
Table 131 OSPF Configuration commands
Command
router ospf
area <0-2>
area-range <0-16>
ip ospf <1-255)>
area-virtual-link <1-3>
message-digest-key <1-255>
md5-key <key string>
Description
Adds selected routing maps to the RIP route redistribution list. This
option adds a route map to the route redistribution list. The routes of
the redistribution protocol matched by the route maps in the route
redistribution list will be redistributed.
Command mode: Router RIP
Removes the route map from the RIP route redistribution list.
Command mode: Router RIP
Exports the routes of this protocol in which the metric and metric type
are specified. To remove a previous configuration and stop exporting
the routes of the protocol, enter none.
Command mode: Router RIP
Displays the current RIP route redistribute configuration.
Command mode: Router RIP
Description
Enter Router OSPF configuration mode.
Command mode: Router OSPF
Configures the OSPF area.
Command mode: Router OSPF
Configures the summary range.
Command mode: Router OSPF
Configures the OSPF interface.
Command mode: Interface IP
Configures a Virtual Link.
Command mode: Router OSPF
Assigns a string to MD5 authentication key.
Command mode: Router OSPF
Configuration Commands
144