Https Access Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 95 User ID Configuration commands
Command
access user <1-10> password <1-128
characters>
access user <1-10> enable
no access user <1-10> enable
no access user <1-10>
show access user

HTTPS Access configuration

The following table describes the HTTPS Access Configuration commands.
Table 96 HTTPS Access Configuration commands
Command
[no] access https enable Enables or disables BBI access (Web access) using HTTPS. The default value is
access https port <TCP
port number>
access https generate-
certificate
access https save-
certificate
Description
Sets the user password of up to 128 characters maximum.
Command mode: Global configuration
Enables the user ID.
Command mode: Global configuration
Disables the user ID.
Command mode: Global configuration
Deletes the user ID.
Command mode: Global configuration
Displays the current user ID parameters.
Command mode: All
Description
disabled.
Command mode: Global configuration
Defines the HTTPS Web server port number.
Command mode: Global configuration
Allows you to generate a certificate to connect to the SSL to be used during the
key exchange. A default certificate is created when HTTPS is enabled for the first
time. The user can create a new certificate defining the information that they
want to be used in the various fields. For example:
Country Name (2 letter code) [ ]: CA
State or Province Name (full name) [ ]: Ontario
Locality Name (for example, city) [ ]: Ottawa
Organization Name (for example, company) [ ]: Hewlett-Packard
Organizational Unit Name (for example, section) [ ]: ProLiant
Common Name (for example, user's name) [ ]: Mr Smith
Email (for example, email address) [ ]: info@hp.com
You must confirm if you want to generate the certificate. It takes approximately
30 seconds to generate the certificate. Then the switch restarts SSL agent.
Command mode: Global configuration
Allows the client, or the Web browser, to accept the certificate and save the
certificate to Flash to be used when the switch is rebooted.
Command mode: Global configuration
Configuration Commands
117