Rip Route Redistribution Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

RIP Interface Configuration commands
Table 129
Command
ip rip authentication key
{<password>}
ip rip enable
no ip rip enable
show interface ip [<1-250>] rip

RIP Route Redistribution configuration

The following table describes the RIP Route Redistribute commands.
RIP Redistribute commands
Table 130
Command
redistribute
{fixed|static|ospf|eospf} <1-32>
no redistribute
{fixed|static|ospf|eospf} <1-32>
redistribute
{fixed|static|ospf|eospf} export
metric <1-15>
show ip rip redistribute
Description
Configures the authentication key password.
Command mode: Interface IP
Enables this RIP interface.
Command mode: Interface IP
Disables this RIP interface.
Command mode: Interface IP
Displays the current RIP configuration.
Command mode: All except User EXEC
Description
Adds selected routing maps to the RIP route redistribution list. This
option adds a route map to the route redistribution list. The routes of
the redistribution protocol matched by the route maps in the route
redistribution list will be redistributed.
Command mode: Router RIP
Removes the route map from the RIP route redistribution list.
Command mode: Router RIP
Exports the routes of this protocol in which the metric and metric type
are specified. To remove a previous configuration and stop exporting
the routes of the protocol, enter none.
Command mode: Router RIP
Displays the current RIP route redistribute configuration.
Command mode: Router RIP
Configuration Commands
150