Snmpv3 Access Table Information - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

The following table describes the SNMPv3 View Table information.
View Table parameters
Table 10
Field
View Name
Subtree
Mask
Type

SNMPv3 Access Table information

The following command displays SNMPv3 access information:
show snmp-server v3 access
Command mode: All
Group Name
----------
v1v2grp
admingrp
The access control sub system provides authorization services.
The vacmAccessTable maps a group name, security information, a context, and a message type,
which could be the read or write type of operation or notification into a MIB view.
The View-based Access Control Model defines a set of services that an application can use for checking
access rights of a group. This group's access rights are determined by a read-view, a write-view, and a
notify-view. The read-view represents the set of object instances authorized for the group while reading
the objects. The write-view represents the set of object instances authorized for the group when writing
objects. The notify-view represents the set of object instances authorized for the group when sending a
notification.
The following table describes the SNMPv3 Access Table information.
Access Table parameters
Table 11
Field
Group Name
Prefix
Model
Level
Match
ReadV
WriteV
Description
Displays the name of the view.
Displays the MIB subtree as an OID string. A view subtree is the set of all MIB object
instances which have a common Object Identifier prefix to their names.
Displays the bit mask.
Displays whether a family of view subtrees is included or excluded from the MIB view.
Model Level
------- ------------ ------ --------- -------- -------
snmpv1 noAuthNoPriv exact
usm authPriv
Description
Displays the name of group.
Displays the prefix that is configured to match the values.
Displays the security model used, for example, SNMPv1, or SNMPv2 or USM.
Displays the minimum level of security required to gain rights of access. For example,
noAuthNoPriv, authNoPriv, or auth-Priv.
Displays the match for the contextName. The options are: exact and prefix.
Displays the MIB view to which this entry authorizes the read access.
Displays the MIB view to which this entry authorizes the write access.
Match ReadV WriteV
iso iso
exact iso iso
Information Commands
NotifyV
v1v2only
iso
22