Snmpv3 Information Commands - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

SNMPv3 Information commands

SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework
by supporting the following:
a new SNMP message format
security for messages
access control
remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
The following table describes the SNMPv3 Information commands.
SNMPv3 Information commands
Table 8
Command
show snmp-server v3 user
show snmp-server v3 view
show snmp-server v3 access
show snmp-server v3 group
show snmp-server v3 community
show snmp-server v3 target-address
show snmp-server v3 target-parameters
show snmp-server v3 notify
show snmp-server v3
Usage
Displays User Security Model (USM) table information.
Command mode: All
Displays information about view name, subtrees, mask and
type of view.
Command mode: All
Displays View-based Access Control information.
Command mode: All
Displays information about the group that includes the security
model, user name, and group name.
Command mode: All
Displays information about the community table.
Command mode: All
Displays the Target Address table.
Command mode: All
Displays the Target parameters table.
Command mode: All
Displays the Notify table.
Command mode: All
Displays all the SNMPv3 information.
Command mode: All
Information Commands
20