Snmpv3 Notify Table Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 90 SNMPv3 Target Parameters Table Configuration commands
Command
snmp-server target-parameters <1-16>
security {usm|snmpv1|snmpv2}
snmp-server target-parameters <1-16>
user-name <1-32 characters>
snmp-server target-parameters <1-16>
level {noAuthNo-
Priv|authNoPriv|authPriv}
no snmp-server target-parameters
<1-16>
show snmp-server target-parameters
<1-16>

SNMPv3 Notify Table configuration

SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for
particular events or conditions, and generates Notification-Class messages based on these events or
conditions.
The following table describes the SNMPv3 Notify Table Configuration commands.
Table 91 SNMPv3 Notify Table Configuration commands
Command
snmp-server notify <1-16> name
<1-32 characters>
snmp-server notify <1-16> tag
<1-255 characters>
no snmp-server notify <1-16>
show snmp-server notify <1-16>
Description
Selects the security model to be used when generating the
SNMP messages.
Command mode: Global configuration
Defines the name that identifies the user in the USM table, on
whose behalf the SNMP messages are generated using this
entry.
Command mode: Global configuration
Selects the level of security to be used when generating the
SNMP messages using this entry. The level noAuthNoPriv
means that the SNMP message will be sent without authen-
tication and without using a privacy protocol. The level
authNoPriv means that the SNMP message will be sent with
authentication but without using a privacy protocol. The
authPriv means that the SNMP message will be sent both
with authentication and using a privacy protocol.
Command mode: Global configuration
Deletes the targetParamsTable entry.
Command mode: Global configuration
Displays the current targetParamsTable configuration.
Command mode: All
Description
Defines a locally arbitrary but unique identifier associated with this
SNMP notify entry.
Command mode: Global configuration
Defines a tag of 255 characters maximum that contains a tag value
which is used to select entries in the Target Address Table. Any entry in
the snmpTargetAddrTable, that matches the value of this tag, is
selected.
Command mode: Global configuration
Deletes the notify table entry.
Command mode: Global configuration
Displays the current notify table configuration.
Command mode: All
Configuration Commands
114