Rip Route Redistribution Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

RIP Route Redistribution configuration

Command: /cfg/l3/rip/redist fixed|static|ospf|eospf
[RIP Redistribute Fixed
The following table describes the RIP Route Redistribute Menu options.
RIP Redistribute Configuration Menu options
Table 133
Command
add <1-32> <1-32>|all
remove <1-32> <1-32>|all
export <1-15>|none
cur
add - Add rmap into route redistribution list
rem - Remove rmap from route redistribution list
export - Export all routes of this protocol
cur - Display current route-maps added
Description
Adds selected routing maps to the RIP route redistribution list. To add all the 32
route maps, enter all. To add specific route maps, enter routing map numbers
one per line, NULL at the end.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution list
will be redistributed.
Removes the route map from the RIP route redistribution list.
Removes routing maps from the list. To remove all 32 route maps, enter all.
To remove specific route maps, enter routing map numbers one per line, NULL
at end.
Exports the routes of this protocol in which the metric and metric type are
specified. To remove a previous configuration and stop exporting the routes of
the protocol, enter none.
Displays the current RIP route redistribute configuration.
Menu]
Configuration Menu
166