Port Mirroring - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 169 RMON Alarm commands
Command
rmon alarm <1-65535> owner
<1-127 characters>
no rmon alarm <1-65535>
show rmon alarm

Port mirroring

Port Mirroring is used to configure, enable, and disable the monitored port. When enabled, network
packets being sent and/or received on a target port are duplicated and sent to a monitor port. By
attaching a network analyzer to the monitor port, you can collect detailed information about your network
performance and usage. Port mirroring is disabled by default.
NOTE: See the "Troubleshooting tools" appendix in the HP 1:10Gb Ethernet BL-c Switch
Application Guide for information on how to use port mirroring.
The following table describes the Port Mirroring Configuration commands.
Port Mirroring Configuration commands
Table 170
Command
[no] port-mirroring enable
show port-mirroring
Description
Enter a text string that identifies the person or entity that uses this alarm
index.
The owner can have a maximum of 127 characters.
Command mode: Global configuration
Deletes this alarm index.
Displays the current RMON Alarm parameters.
Command mode: All
Description
Enables or disables port mirroring.
Command mode: Global configuration
Displays current settings of the mirrored and monitoring ports.
Command mode: All except User EXEC
Configuration Commands
172