HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual page 108

The following table describes the SNMPv3 Configuration commands.
SNMPv3 Configuration commands
Table 83
Command
snmp-server user <1-16>
snmp-server view <1-128>
snmp-server access <1-32>
snmp-server group <1-16>
snmp-server community
<1-16>
snmp-server target-address
<1-16>
snmp-server target-
parameters <1-16>
snmp-server notify <1-16>
snmp-server version
{v1v2v3|v3only}
show snmp-server v3
Description
Configures a user security model (USM) entry for an authorized user. You can
also configure this entry through SNMP. The range is 1-16.
Command mode: Global configuration
Configures different MIB views. The range is 1-128.
Command mode: Global configuration
Configures access rights. The View-based Access Control Model defines a set
of services that an application can use for checking access rights of the user.
You need access control when you have to process retrieval or modification
request from an SNMP entity. The range is 1-32.
Command mode: Global configuration
Configures an SNMP group. A group maps the user name to the access group
names and their access rights needed to access SNMP management objects.
A group defines the access rights assigned to all names that belong to a
particular group. The range is 1-16.
Command mode: Global configuration
Configures a community table entry. The community table contains objects for
mapping community strings and version-independent SNMP message
parameters. The range is 1-16.
Command mode: Global configuration
Configures the destination address and user security levels for outgoing
notifications. This is also called the transport endpoint. The range is 1-16.
Command mode: Global configuration
Configures SNMP parameters, consisting of message processing model,
security model, security level, and security name information. There may be
multiple transport endpoints associated with a particular set of SNMP
parameters, or a particular transport endpoint may be associated with several
sets of SNMP parameters. The range is 1-16.
Command mode: Global configuration
Configures a notification index. A notification application typically monitors a
system for particular events or conditions, and generates Notification-Class
messages based on these events or conditions. The range is 1-16.
Command mode: Global configuration
Enables or disables the access to SNMP version 1 and version 2. This
command is enabled by default.
Command mode: Global configuration
Displays the current SNMPv3 configuration.
Command mode: All
Configuration Commands
108