Snmpv3 Community Table Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 87 SNMPv3 Group Configuration commands
Command
show snmp-server group <1-16>

SNMPv3 Community Table configuration

These commands are used for configuring the community table entry. The configured entry is stored in the
community table list in the SNMP engine. This table is used to configure community strings in the Local
Configuration Datastore (LCD) of SNMP engine.
The following table describes the SNMPv3 Community Table Configuration commands.
Table 88 SNMPv3 Community Table Configuration commands
Command
snmp-server community <1-16>
index <1-32 characters>
snmp-server community <1-16>
name <1-32 characters>
snmp-server community <1-16>
user-name <1-32 characters>
snmp-server community <1-16>
tag <1-255 characters>
no snmp-server community
<1-16>
show snmp-server community
<1-16>
Description
Displays the current vacmSecurityToGroup configuration.
Command mode: All
Description
Configures the unique index value of a row in this table. The index can
have a maximum of 32 characters.
Command mode: Global configuration
Defines the name, up to 32 characters.
Command mode: Global configuration
Defines a readable 32 character string that represents the corresponding
value of an SNMP community name in a security model.
Command mode: Global configuration
Configures a tag of up to 255 characters maximum. This tag specifies a
set of transport endpoints to which a command responder application
sends an SNMP trap.
Command mode: Global configuration
Deletes the community table entry.
Command mode: Global configuration
Displays the community table configuration.
Command mode: All
Configuration Commands
112