Route Information - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 27 Layer 3 information commands
Command
show interface ip rip
show layer3 information
show ip igmp groups
show ip vrrp information
show layer3

Route information

Using the commands listed below, you can display all or a portion of the IP routes currently held in the
switch.
Table 28 Route Information commands
Command
show ip route address <IP address>
show ip route gateway <IP address>
show ip route type
{indirect|direct|local|broadcast|martian|
multicast}
show ip route tag
{fixed|static|addr|rip|ospf|broadcast|
multicast|martian}
show ip route interface <1-256>
Usage
Displays RIP user's configuration.
Command mode: All
Displays IP Information. IP information, includes:
IP interface information: Interface number, IP address, subnet mask, VLAN
number, and operational status.
Default gateway information: Metric for selecting which configured
gateway to use, gateway number, IP address, and health status
IP forwarding information: Enable status, lnet and lmask
Port status
Command mode: All except User EXEC
Displays IGMP Information.
Command mode: All except User EXEC
Displays the VRRP Information.
Command mode: All except User EXEC
Dumps all switch information available from Layer 3 memory (10K or more,
depending on your configuration).
If you want to capture dump data to a file, set your communication software
on your workstation to capture session data prior to issuing the dump
commands.
Command mode: All except User EXEC
Usage
Displays a single route by destination IP address.
Command mode: All except User EXEC
Displays routes to a single gateway.
Command mode: All except User EXEC
Displays routes of a single type.
Command mode: All except User EXEC
Displays routes of a single tag.
Command mode: All except User EXEC
Displays routes on a single interface.
Command mode: All except User EXEC
Information Commands
44