Rmon Event Information - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 42 RMON Alarm Information
Command
rEvtIdx
fEvtIdx
Last value
OID

RMON event information

The following command displays RMON event information:
show rmon event
Command mode: All
RMON Event group configuration:
Index
-----
1
2
3
4
5
10
11
15
100
The following table describes the RMON Event Information parameters.
RMON Event Information
Table 43
Command
Index
Type
Last Sent
Description
Usage
Displays the rising alarm event index that is triggered when a rising threshold is crossed.
Displays the falling alarm event index that is triggered when a falling threshold is crossed.
Displays the last sampled value.
Displays the MIB Object Identifier for each alarm index.
Type Last Sent
---- ----------------
both 0D: 0H: 1M:20S
none 0D: 0H: 0M: 0S
log 0D: 0H: 0M: 0S
trap 0D: 0H: 0M: 0S
both 0D: 0H: 0M: 0S
both 0D: 0H: 0M: 0S
both 0D: 0H: 0M: 0S
both 0D: 0H: 0M: 0S
both 0D: 0H: 0M: 0S
Usage
Displays the index number that identifies each event instance.
Displays the type of notification provided for this event, as follows: log, trap, both.
Displays the time that passed since the last switch reboot, when the most recent event was
triggered. This value is cleared when the switch reboots.
Displays a text description of the event.
Description
---------------------------------
Event_1
Event_2
Event_3
Event_4
Log and trap event for Link Down
Log and trap event for Link Up
Send log and trap for icmpInMsg
Send log and trap for icmpInEchos
Event_100
Information Commands
61