Ospf Md5 Key Configuration; Igmp Configuration; Igmp Snooping Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 137 OSPF Route Redistribution Configuration commands
Command
[no] redistribute {fixed|static|rip}
export metric <1-16777214> metric-
type {type1|type2}
show ip ospf redistribute

OSPF MD5 Key configuration

The following table describes the OSPF MD5 Key Configuration commands.
Table 138 OSPF MD5 Key Configuration commands
Command
message-digest-key <1-255> md5-key
<key string>
no message-digest-key <1-255>
show ip ospf message-digest-key
<1-255>

IGMP configuration

IGMP Snooping allows the switch to forward multicast traffic only to those ports that request it. IGMP
Snooping prevents multicast traffic from being flooded to all ports. The switch learns which server hosts
are interested in receiving multicast traffic, and forwards it only to ports connected to those servers.

IGMP Snooping configuration

The following table describes the IGMP Snooping Configuration commands.
Table 139 IGMP Snooping commands
Command
ip igmp snoop timeout <1-255>
Description
Exports the routes of this protocol as external OSPF AS-external
LSAs in which the metric and metric type are specified.
Command mode: Router OSPF
Displays the current route map settings.
Command mode: All except User EXEC
Description
Sets the authentication key for this OSPF packet.
Command mode: Router OSPF
Deletes the authentication key for this OSPF packet.
Command mode: Router OSPF
Displays the current MD5 key configuration.
Command mode: All except User EXEC
Description
Sets the Maximum Response Time (MRT) for IGMP hosts. MRT is one
of the parameters used to determine the age out period of the IGMP
hosts. Increasing the timeout increases the age out period.
The default is 10 seconds.
Command mode: Global configuration
Configuration Commands
150