Global Commands - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

The following table describes the ISCLI command modes.
ISCLI Command Modes
Table 4
Command Mode/Prompt
User EXEC
Switch>
Privileged EXEC
Switch#
Global configuration
Switch(config)#
Interface port
Switch(config-if)#
VLAN configuration
Switch(config-vlan)#
Interface IP configuration
Switch(config-ip-if)#

Global commands

Some basic commands are recognized throughout the ISCLI hierarchy. These commands are useful for
obtaining online Help, navigating through the interface, and saving configuration changes. To get help
about a specific command, type the command, followed by help.
The following table describes the global commands.
Global commands
Table 5
Command
?
exit
copy running-config
startup-config
exit or quit
Command used to enter or exit.
Default mode, entered automatically
exit—Exit
logout—Exit
enable—Enter Privileged EXEC mode, from User EXEC mode
disable—Exit to User EXEC mode
exit or logout—Quit ISCLI
configure terminal—Enter Global Configuration mode, from
Privileged EXEC mode
end or exit—Exit to Privileged EXEC mode
interface port <port number>—Enter Interface port mode, from
Global Configuration mode
exit—Exit to Global Configuration mode
end—Exit to Privileged EXEC mode
vlan <1-4095>—Enter VLAN Configuration mode, from Global
Configuration mode
exit—Exit to Global Configuration mode
end—Exit to Privileged EXEC mode
interface ip <1-256>—Enter Interface IP Configuration mode, from
Global Configuration mode
exit—Exit to Global Configuration mode
end—Exit to Privileged EXEC mode
Action
Provides more information about a specific command or lists commands available at
the current level.
Go up one level in the command-mode structure.
Write configuration changes to non-volatile flash memory.
Exit from the command line interface and log out.
ISCLI basics
16