Snmpv3 Target Address Table Configuration; Snmpv3 Target Parameters Table Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

SNMPv3 Target Address Table configuration

These commands allow you to set passwords and display current user statistics. Passwords can be a
maximum of 15 characters. To disable a user, set the password to null.
The following table describes the SNMPv3 Target Address Table Configuration commands.
SNMPv3 Target Address Table Configuration commands
Table 89
Command
snmp-server target-address <1-16>
address <IP address> name <1-32
characters>
snmp-server target-address <1-16> name
<1-32 characters> address <transport
IP address>
snmp-server target-address <1-16> port
<transport address port>
snmp-server target-address <1-16>
taglist <1-255 characters>
snmp-server target-address <1-16>
parameters-name <1-32 characters>
no snmp-server target-address <1-16>
show snmp-server target-address <1-16>

SNMPv3 Target Parameters Table configuration

You can configure the target parameters entry and store it in the target parameters table in the SNMP
engine. This table contains parameters that are used to generate a message. The parameters include the
message processing model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for
example: USM), the security name, and the security level (noAuthnoPriv, authNoPriv, or
authPriv).
The following table describes the SNMPv3 Target Parameters Table Configuration commands.
Table 90 SNMPv3 Target Parameters Table Configuration commands
Command
snmp-server target-parameters <1-16>
name <1-32 characters>
snmp-server target-parameters <1-16>
message {snmpv1|snmpv2c|snmpv3}
Description
Configures the locally arbitrary, but unique identifier, target
address name associated with this entry.
Command mode: Global configuration
Configures a transport address IP that can be used in the
generation of SNMP traps.
Command mode: Global configuration
Configures a transport address port that can be used in the
generation of SNMP traps.
Command mode: Global configuration
Configures a list of tags (up to 255 characters maximum) that
are used to select target addresses for a particular operation.
Command mode: Global configuration
Defines the name.
Command mode: Global configuration
Deletes the Target Address Table entry.
Command mode: Global configuration
Displays the current Target Address Table configuration.
Command mode: All
Description
Configures the locally arbitrary, but unique identifier that is
associated with this entry.
Command mode: Global configuration
Configures the message processing model that is used to
generate SNMP messages.
Command mode: Global configuration
Configuration Commands
113