Rip Route Redistribution Configuration; Open Shortest Path First Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual

RIP Route Redistribution configuration

NOTE: RIP commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the RIP Route Redistribute commands.
Table 129 RIP Redistribute commands
Command
redistribute
{fixed|static|ospf|eospf}
<1-32>
no redistribute
{fixed|static|ospf|eospf}
<1-32>
redistribute
{fixed|static|ospf|eospf}
export metric <1-15>
show ip rip redistribute

Open Shortest Path First configuration

NOTE: OSPF commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the basic Open Shortest Path First (OSPF) commands. The following sections provide
more detailed information and commands.
Table 130 OSPF Configuration commands
Command
router ospf
area <0-2>
area-range <0-16>
ip ospf <1-256)>
area-virtual-link <1-3>
message-digest-key <1-255> md5-
key <key string>
host <1-128>
lsdb-limit <0-2000>
[no] default-information <1-
16777215> <as-value>
Description
Adds selected routing maps to the RIP route redistribution list. This option adds
a route map to the route redistribution list. The routes of the redistribution
protocol matched by the route maps in the route redistribution list will be
redistributed.
Command mode: Router RIP
Removes the route map from the RIP route redistribution list.
Command mode: Router RIP
Exports the routes of this protocol in which the metric and metric type are
specified. To remove a previous configuration and stop exporting the routes of
the protocol, enter .
none
Command mode: Router RIP
Displays the current RIP route redistribute configuration.
Command mode: Router RIP
Description
Enter Router OSPF configuration mode.
Command mode: Router OSPF
Configures the OSPF area.
Command mode: Router OSPF
Configures the summary range.
Command mode: Router OSPF
Configures the OSPF interface.
Command mode: Interface IP
Configures a Virtual Link.
Command mode: Router OSPF
Assigns a string to MD5 authentication key.
Command mode: Router OSPF
Configures an OSPF host route. Up to 128 host routes can be
configured. Host routes are used for advertising network device IP
addresses to external networks to perform server load balancing within
OSPF. It also makes Area Border Route (ABR) load sharing and ABR
failover possible.
Command mode: Router OSPF
Sets the link state database limit.
Command mode: Router OSPF
Sets one default route among multiple choices in an area.
Command mode: Router OSPF
Configuration Commands 117