Rmon Event Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 167 RMON History commands
Command
rmon history <1-65535>
polling-interval <1-3600>
rmon history <1-65535> owner
<1-127 characters>
no rmon history <1-65535>
show rmon history

RMON event configuration

The following table describes the RMON Event commands.
RMON Event commands
Table 168
Command
rmon event <1-65535> description
<1-127 characters>
rmon event <1-65535> type
<log|trap|both>
rmon event <1-65535> owner <1-127
characters>
no rmon event <1-65535>
show rmon event
Description
Configures the time interval over which the data is sampled for each
bucket.
The range is from 1 to 3600 seconds. The default value is 1800 seconds.
Command mode: Global configuration
Enter a text string that identifies the person or entity that uses this history
index.
The owner can have a maximum of 127 characters.
Command mode: Global configuration
Deletes the selected history group.
Command mode: Global configuration
Displays the current RMON History parameters.
Command mode: All
Description
Enter a text string to describe the event.
The description can have a maximum of 127 characters.
Command mode: Global configuration
Selects the type of notification provided for this event. For log
events, an entry is made in the log table and sent to the
configured syslog host. For trap events, an SNMP trap is sent to
the management station.
Command mode: Global configuration
Enter a text string that identifies the person or entity that uses this
event index.
The owner can have a maximum of 127 characters.
Command mode: Global configuration
Deletes this event index.
Command mode: Global configuration
Displays the current RMON Event parameters.
Command mode: All
Configuration Commands
170