System Information Commands - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Cli Reference Manual

Table 6 Information commands
Command
show information-dump

System Information commands

The following table describes the System Information commands.
Table 7 System Information commands
Command
show snmp-server v3
show sys-info
show logging messages
show access user
Usage
Dumps all switch information available (10K or more, depending on your
configuration).
If you want to capture dump data to a file, set your communication software
on your workstation to capture session data prior to issuing the dump
commands.
Command mode: All
Usage
Displays SNMP v3 information.
Command mode: All
Displays system information, including:
System date and time
Switch model name and number
Switch name and location
Time of last boot
MAC address of the switch management processor
IP address of IP interface #1
Hardware version and part number
Software image file and version number
Configuration name
Log-in banner, if one is configured
Command mode: All
Displays most recent syslog messages.
Command mode: All
Displays User Access information.
Command mode: All except User EXEC
Information Commands
19