ACL information
The following table describes the commands used to display information about Access Control Lists and
Groups.
ACL information commands
Table 40
Command
show access-control list <1-896>
show access-control group <1-896>
show access-control
The following command displays Access Control List information:
show access-control
Command mode: All
Current ACL information:
------------------------
Filter 1 profile:
Ethernet
Actions
Filter 2 profile:
Ethernet
Actions
No ACL groups configured.
ACL information provides configuration parameters for each Access Control List. It also shows which ACLs
are included in each ACL Group.
- VID
: 1/0xfff
: Set COS to 0
- VID
: 1/0xfff
: Permit
Usage
Displays information about the selected ACL.
Command mode: All except User EXEC
Displays information about ACL Groups.
Command mode: All except User EXEC
Displays information about all ACLs.
Command mode: All
Information Commands
58