Figure 45. Removing The Blower Bracket From The Server System; Figure 46. Removing The System Blowers From The Bracket - Intel SR1630BC - Server System - 0 MB RAM Service Manual

5. Lift the fan bracket from the server. Lift the bracket at an angle, with the front of the
bracket first, to clear the hard disk drive brackets (see letter "C").

Figure 45. Removing the Blower Bracket from the Server System

6. Turn the bracket over and remove the two screws that attach the failed fan to the fan
bracket. Save these screws. You will reinstall them later. See letter "A" in the
following figure). Lift the fan from the bracket (see letter "B").
50

Figure 46. Removing the System Blowers from the Bracket

®
Intel Server System SR1630BC Service Guide