Configuration Jumpers - Intel SR1630BC - Server System - 0 MB RAM Service Manual

Configuration Jumpers

Jumper Name
J8C1: BMC
Force Update
J2D1: Password
Clear
J2D2: CMOS
Clear
J1A1: BIOS
Recovery
Intel® Server System SR1630BC Service Guide
Pins
1-2 BMC Firmware Force Update Mode - Disabled (Default)
2-3 BMC Firmware Force Update Mode - Enabled
1-2 These pins should have a jumper in place for normal
system operation. (Default)
2-3 If these pins are jumpered, administrator and user
passwords are cleared on the next reset
Note: These pins should not be jumpered for normal
operation.
1-2 These pins should have a jumper in place for normal
system operation (Default)
2-3 If these pins are jumpered, the CMOS settings are
cleared on the next reset
Note: These pins should not be jumpered for normal
operation.
1-2 These pins should have a jumper in place for normal
system operation.(Default)
2-3 The main system BIOS will not boot with these pins
jumpered.
Note: The system boots from EFI-bootable recovery
media with a recovery BIOS image.
What happens at system reset...
9