Power Supply; Optional Hardware; Intel Raid Activation Key; Hard Disk Drives - Intel SR1630BC - Server System - 0 MB RAM Service Manual

See the Intel
information regarding the memory sub-system.

Power Supply

A minimum of 400 Watts is required. Your supply must provide a minimum of 3.5 A of 5
V standby current or the board will not boot.

Optional Hardware

®
Intel RAID Activation Key
If RAID 5 is needed, you can install the optional Intel
AXXRAKSW5. To enable RAID 5, this activation key is placed on the SATA Key
connector located at the left side of the server board. For information on how to install the
®
Intel RAID Activation Key AXXRAKSW5 accessory to enable RAID 5, see the
documentation that is included with the accessory kit.

Hard Disk Drives

The server board provides six SATA ports. The six SATA ports are near the rear left side
of the server board.
See the documentation included with your server chassis for additional drive information
and drive installation instructions.
Note: The Intel
System SR1630BC system.
22
®
Server System SR1630BC Technical Product Specification for additional
®
Remote Management Module 3 will not be supported in the Intel
®
RAID Activation Key
Intel® Server System SR1630BC Service Guide
®
Server