Installing The Processor Air Duct; Figure 17. Removing The Processor Air Duct - Intel SR1630BC - Server System - 0 MB RAM Service Manual

5. Lift the processor air duct from its location over the two processor sockets.

Installing the Processor Air Duct

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
Cover".
4. Lower the air duct into place; insert the two hooks at the front of the processor air
duct into the corresponding slots on the bracket behind the two system blower fans.
Use caution not to pinch or disengage cables that may be near or under the air duct.
®
Intel Server System SR1630BC Service Guide

Figure 17. Removing the Processor Air Duct

"Safety
"Removing the System
27