Installing And Removing A Fixed Hard Drive; Installing And Removing A Hard Disk Drive - Intel SR1630BC - Server System - 0 MB RAM Service Manual

11. Remove the processor.
12. If installing a replacement processor, see
install the protective socket cover over the empty processor socket and reinstall the
chassis cover.

Installing and Removing a Fixed Hard Drive

Caution: Fixed mount hard drives are NOT hot-swappable. Before removing or replacing the drive,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
You can install up to two fixed SATA drives in the Intel
Service Guide. See

Installing and Removing a Hard Disk Drive

Caution: The hard drives are NOT hot swappable. Before removing or replacing a hard drive, you
must first take the server out of service, turn off all peripheral devices connected to the
system, turn off the system by pressing the power button, and unplug the AC power cord
from the system or wall outlet.
You can install up to two SATA drives. The HDD0 drive bay is at the left side of the
chassis, underneath the optional CD-ROM drive. The HDD1 drive bay is at the right side
of the chassis. You do not need to install the drives in order; for example, you can install
HDD1 before HDD0.
Note: The server system does not support all hard drives. See
link to a list of supported hardware.
1. Locate the drive position you want to use.
36
"Server System References"
"Installing the Processor". Otherwise,
®
Server System SR1630BC
for a link to a list of supported hardware.
"Server System References"
®
Intel Server System SR1630BC Service Guide
for a