Figure 24. Installing The Processor; Figure 25. Close The Load Plate And Socket Lever - Intel SR1630BC - Server System - 0 MB RAM Service Manual

9. Align the processor cutouts to match the two socket pins, and then insert the
processor into the socket as shown in Figure 24.
10. Close the load plate (see the letter "A" in Figure 25), close the socket lever and
ensure the load plate tab engages under the socket lever when fully closed. (See
letter "B" and "C" in Figure 25)
Note: Make sure the alignment triangle mark and the alignment triangle cutout align correctly.
To assist in package orientation and alignment with the socket:
®
Intel Server System SR1630BC Service Guide

Figure 24. Installing the Processor

Figure 25. Close the Load Plate and Socket Lever

33