Vlan Features; Security Features - Cisco WS-C3020 Software Configuration Manual

Catalyst blade switch for hp
Table of Contents

Advertisement

Features

VLAN Features

These are the VLAN features:

Security Features

The switch ships with these security features:
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
1-6
Flex Link Layer 2 interfaces to back up one another as an alternative to STP for basic link
redundancy
Link state tracking (Layer 2 trunk failover) to mirror the state of the external Ethernet links and to
allow the failover of the processor blade traffic to an operational external link on a separate Cisco
Ethernet switch
Support for up to 1005 VLANs for assigning users to VLANs associated with appropriate network
resources, traffic patterns, and bandwidth
Support for VLAN IDs in the 1 to 4094 range as allowed by the IEEE 802.1Q standard
VLAN Query Protocol (VQP) for dynamic VLAN membership
Inter-Switch Link (ISL) and IEEE 802.1Q trunking encapsulation on all ports for network moves,
adds, and changes; management and control of broadcast and multicast traffic; and network security
by establishing VLAN groups for high-security users and network resources
Dynamic Trunking Protocol (DTP) for negotiating trunking on a link between two devices and for
negotiating the type of trunking encapsulation (IEEE 802.1Q or ISL) to be used
VLAN Trunking Protocol (VTP) and VTP pruning for reducing network traffic by restricting
flooded traffic to links destined for stations receiving the traffic
Voice VLAN for creating subnets for voice traffic from Cisco IP Phones
VLAN 1 minimization for reducing the risk of spanning-tree loops or storms by allowing VLAN 1
to be disabled on any individual VLAN trunk link. With this feature enabled, no user traffic is sent
or received on the trunk. The switch CPU continues to send and receive control protocol frames.
VLAN Flex Link Load Balancing to provide Layer 2 redundancy without requiring Spanning Tree
Protocol (STP). A pair of interfaces configured as primary and backup links can load balance traffic
based on VLAN.
Private VLANs to address VLAN scalability problems, to provide a more controlled IP address
allocation, and to allow Layer 2 ports to be isolated from other ports on the switch
Port security on a PVLAN host to limit the number of MAC addresses learned on a port, or define
which MAC addresses may be learned on a port
IP Service Level Agreements (IP SLAs) support to measure network performance by using active
traffic monitoring
Web authentication to allow a supplicant (client) that does not support IEEE 802.1x functionality to
be authenticated using a web browser
MAC authentication bypass (MAB) aging timer to detect inactive hosts that have authenticated after
they have authenticated by using MAB
Password-protected access (read-only and read-write access) to management interfaces (device
manager and the CLI for protection against unauthorized configuration changes
Chapter 1
Overview
OL-8915-03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3020

Table of Contents