Monitoring Vtp - Cisco Catalyst 2975 Software Configuration Manual

Chapter 15 Configuring VTP

Monitoring VTP

You monitor VTP by displaying VTP configuration information: the domain name, the current VTP
revision, and the number of VLANs. You can also display statistics about the advertisements sent and
received by the switch.
Table 15-3
Table 15-3
Command
show vtp counters
show vtp devices [conflict] Display information about all VTP version 3 devices in the domain.
show vtp interface
[interface-id]
show vtp password
show vtp status
OL-19720-02
shows the privileged EXEC commands for monitoring VTP activity.
VTP Monitoring Commands
Purpose
Display counters about VTP messages that have been sent and received.
Conflicts are VTP version 3 devices with conflicting primary servers.
The show vtp devices command does not display information when the
switch is in transparent or off mode.
Display VTP status and configuration for all interfaces or the specified
interface.
Display the VTP password. The form of the password displayed depends
on whether or not the hidden keyword was entered and if encryption is
enabled on the switch.
Display the VTP switch configuration information.
Catalyst 2975 Switch Software Configuration Guide
Monitoring VTP
15-17