Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 223

show ip bgp network
show bgp ipv6 network
show ip bgp next-hops
show bgp ipv6 next-hops
5 routes (200 bytes)
5 destinations (360 bytes) of which 5 have a route
5 routes selected for route table installation
4 path attribute entries (608 bytes)
Local-RIB version 33. FIB version 33.
Status codes: > best, * invalid, s suppressed, d dampened, r rejected,
a auto-summarized
Prefix
Origin
> 3ffe:0:1:1::/64
0 inc.
See show ip bgp neighbors routes.
See show bgp ipv6 neighbors routes.
Use to display information about networks in an AS.
If you filter the display with field options, the usual introductory information
about BGP attributes is displayed only if you issue the intro fields option. See
show ip bgp"show ip bgp" on page 160 for descriptions of the fields displayed by
this keyword.
Example
host1#show bgp ipv6 network
Prefix
3ffe:0:0:2::/64
See show ip bgp network.
See show bgp ipv6 network.
Use to display information about BGP next hops.
Specify all indirect next hops or a particular indirect next hop.
Example
host1:3#show ip bgp next-hops
Indirect next-hop 4.4.4.4
Reachable (metric 2)
Direct next-hop atm2/0.34 (34.34.34.4)
Reference count is 3
Indirect next-hop ::ffff:2.2.2.2
MPLS stacked label 17
Reachable (metric 3)
Direct next-hop tun mpls:vpnInL17-23
Reference count is 1
Chapter 1: Configuring BGP Routing
Peer Next-hop
12.12.12.12 ::102.102.102.2
Weight Route-map
MED LocPrf Weight
0 100
Backdoor
No
187
Monitoring BGP