Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 384

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Table 49: show mpls interface Output Fields (continued)
348
Monitoring MPLS Interfaces
Field Name Field Description
accum label alloc Cumulative total number of labels allocated and advertised to this
peer
accum label learned Cumulative total number of labels received from this peer
notf Number of notification messages received or received bad or sent
mapping Number of label mapping messages received or received bad or
sent
msg Number of messages sent or received
request Number of label request messages received or received bad or sent
abort Number of label request abort messages for downstream on
demand received or received bad or sent
release Number of label release messages received or received bad or sent
withdraw Number of label withdraw messages received or received bad or
sent
addr Number of address messages received or received bad or sent
addr withdraw Number of address withdraw messages received or received bad
or sent
msgId Number of message IDs received or sent
unknown message type err Number or unknown message type errors received
last info error code Last received notification code
loop detected Loop detected; for downstream on demand
hello recv Number of hello messages received
hello sent Number of hello messages sent
bad hello recv Number of hello messages received bad
adj setup time Time in hh:mm:ss since adjacency set up
last hello recv time Time in hh:mm:ss since last hello message received
last hello sent time Time in hh:mm:ss since last hello message sent
failed lbl lookup Number of packets received whose labels are not recognized
octets Number of octets received or sent
hcoctets Number of high-capacity (64-bit) octets received or sent
pkts Number of packets received or sent