Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 533

show ip vrf interfaces
VRF IP Router Id: 10.12.12.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0 ATM2/0.12
Import VPN Route Target Extended Communities:
100:2
Export VPN Route Target Extended Communities:
100:2
Import Route-map : importmap1
Export Route-map : exportmap23 (can filter routes)
Global Import Route-map : globalimportmap2
Global Export Route-map : globalexportmap3
VRF pe13; Default RD 100:13
VRF IP Router Id: 10.13.13.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0 ATM2/0.13 tun mpls:vpnEgL19-5 ip dyn-26
Import VPN Route Target Extended Communities:
100:3
Export VPN Route Target Extended Communities:
100:3
No Import Route-map
No Export Route-map
No Global Import Route-map
No Global Export Route-map
See show ip vrf.
Use to display summary information about all interfaces associated with all VRFs
configured in a virtual router.
Use the detail keyword to display detailed information about the interfaces.
Field descriptions
Interface Interface type and interface specifier
IP-Address IP address of the interface
Status Status of the interface
Protocol Status of the line protocol
VRF Name of the VRF with which the interface is associated
interface status Status of the interface
line protocol Status of the line protocol
Link up/down trap Status of SNMP link up/down traps on the interface
Internet address IP address of the interface
Chapter 5: Configuring BGP-MPLS Applications
tun mpls:vpnEgL18-4 ip dyn-25
Monitoring BGP/MPLS VPNs
497