Monitoring Mpls Explicit Paths; Monitoring The Rsvp-Te Bypass Tunnels; Table 46: Show Mpls Explicit-Paths Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Related Topics

Monitoring MPLS Explicit Paths

Display MPLS explicit paths.
Purpose
To display information about all MPLS explicit paths:
Action
host1:pe2#show mpls explicit-paths
To display information about the MPLS explicit path named rx1-path2:
host1:pe2#show mpls explicit-paths name rx1-path2
Table 46 on page 341 lists the show mpls explicit-paths command output fields.
Meaning

Table 46: show mpls explicit-paths Output Fields

Related Topics

Monitoring the RSVP-TE Bypass Tunnels

Display information about the backup status of primary LSPs protected with bypass
Purpose
tunnels.
To display the backup status of protected primary LSPs on a core router:
Action
host1(config-if)# show mpls fast-reroute database
show mpls
path name/identifier rx1-path enabled
1: next-address 70.70.70.2
2: next-address 30.30.30.1
not referenced by any options
path name/identifier rx1-path2 enabled
1: next-address 60.60.60.2
2: next-address 40.40.40.1
not referenced by any options
path name/identifier rx1-path2 enabled
1: next-address 60.60.60.2
2: next-address 40.40.40.1
not referenced by any options
Field Name Field Description
path name/identifier Name or identifier of explicit path and status, enabled or disabled,
followed by list of path links and the IP address for each link's next
address
show mpls explicit-paths
OutIntf
Monitoring MPLS Explicit Paths
Chapter 4: Monitoring MPLS
Backup
341