Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 392

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Table 54: show mpls rsvp Output Fields (continued)
356
Monitoring RSVP Path State Control Blocks, Reservation State Control Blocks, or Sessions
Field Name Field Description
timeout Period of time in milliseconds before PSB/RSB times out if no
refresh arrives.
InLabel Incoming label information
Associated tunnel Tunnel identifier for minor interface for which the RSVP information
is displayed
PHopIntf Penultimate hop interface
IncomingIntf Incoming interface
OutgoingIntf Outgoing interface
PHopAddr Penultimate hop address
m_ipNextHopAddr Next hop address
NextHop Type of next hop (loose, strict, session)
LabelRange RSVP session label range
SenderTSpec Traffic parameters for the sender
Token Bucket Rate Sender's description of generated traffic, in kbps
Token Bucket Size Sender's description of generated traffic, in kbps
Peak Data Rate Lender's peak traffic generation rate
Min Policed Unit Minimum packet size generated by sender
Max Packet Size Maximum packet size generated by sender
RRO Record route object
ADSPEC Indicates presence of this QoS object
IN ERO Incoming explicit route object
OUT ERO Outgoing explicit route object
SES ATTR RSVP session attributes
Setup Pri Setup priority of tunnel
Hold Pri Hold priority of tunnel
name Name of the tunnel