Monitoring Ldp Profiles - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Table 41: show ldp neighbor Output Fields (continued)
Related Topics

Monitoring LDP Profiles

Display a specific LDP profile, or all LDP profiles.
Purpose
334
Monitoring LDP Profiles
Field Name Field Description
Up Time that the adjacency has been up, in hh:mm:ss format
Graceful Restart State of graceful restart, enabled or disabled
Helper Mode State of graceful restart helper mode, enabled or disabled
Reconnect Time Value for reconnect time received from peer in FT TLV, in
milliseconds
Recovery Time Value for recovery time received from peer in FT TLV, in
milliseconds
State Status of the neighbor's graceful restart, one of the following:
nonexistent LDP session is not established
restarting Neighbor LSR is restarting
recovering Session with neighbor LSR has reestablished after the neighbor
restarted; label bindings are being exchanged
operational LDP session is up
Neighbor IP address of LDP peer
Initialization Number of initialization messages received and sent
Keepalive Number of keepalive messages received and sent
Notification Number of notification messages received and sent
Address Number of address messages received and sent
Address withdraw Number of address withdraw messages received and sent
Label mapping Number of label mapping messages received and sent
Label request Number of label request messages received and sent
Label withdraw Number of label withdraw messages received and sent
Label release Number of label release messages received and sent
show ldp neighbor