Monitoring Rsvp Path State Control Blocks, Reservation State Control Blocks, Or Sessions; Table 53: Show Mpls Profile Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide

Table 53: show mpls profile Output Fields

Related Topics
Monitoring RSVP Path State Control Blocks, Reservation State Control Blocks, or
Sessions
Display RSVP path state control blocks, reservation state control blocks, or session
Purpose
information about the virtual router to assist in debugging. A session can be any of
the following:
To display path state control blocks for an ingress session:
Action
host1#show mpls rsvp psb
To display reservation state control blocks for an ingress session:
host1#show mpls rsvp rsb
354

Monitoring RSVP Path State Control Blocks, Reservation State Control Blocks, or Sessions

Field Name Field Description
profile Number of interfaces that use the profile
refresh-period Timeout period in seconds between generation of refresh messages
timeout factor Number of refresh messages that can be lost before the session is
ended
show mpls profile
ingress session Originating on the router
egress session Terminating on the router
transit session Travelling through the router
PSB: Sender 223.10.1.1 LSPId 1 timeout -- InLabel --
PHopIntf
IncomingIntf
OutgoingIntf ATM2/0.1
PHopAddr 0.0.0.0 m_ipNextHopAddr 221.1.1.1
NextHop 221.1.1.1/255.255.255.255 (strict)
LabelRange --
SenderTSpec CType IntServ Controlled Load
Token Bucket Rate 0
Token Bucket Size 0
Peak Data Rate 0
Min Policed Unit 0
Max Packet Size 0
Flags : InUse
RroRequired
PathRefreshSent
RSB: Timeout 157500 label 1/33
Flags : InUse
StyleConverted