Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 220

JUNOSe 11.1.x BGP and MPLS Configuration Guide
show ip bgp neighbors paths
show bgp ipv6 neighbors paths
host1# show ip bgp neighbors 1.02.3.4 paths
Address Refcount Origin
0xC384BD0 1 IGP
0xC384C40 1 IGP
0xC384CB0 1 IGP
0xC384D20 1 IGP
0xC384D90 1 IGP
0xC384E00 1 IGP
0xC384E70 1 IGP
0xC384EE0 1 IGP
0xC384F50 1 IGP
0xC384FC0 1 IGP
0xC385030 1 IGP
show ip bgp neighbors received prefix-filter
184
Monitoring BGP
d63.65.12.0/24
d63.73.12.0/24
See show ip bgp neighbors dampened-routes.
See show bgp ipv6 neighbors dampened-routes.
Use to display path information for the specified BGP neighbor.
This command displays only the most common path attributes. BGP internally
maintains additional attributes that are not displayed for example, the MED,
local preference, and communities attributes.
Field descriptions
Address Hexadecimal number that uniquely identifies the path attributes
Refcount Number of routes that share the path attributes
Origin Value of the origin path attribute
Next-hop Value of the next-hop path attribute
AS-path Value of the AS-path attribute
Example
Next-hop AS-path
192.168.1.1 11488 701 2853 5515 764
192.168.1.1 11488 701 4183
192.168.1.1 11488 701 1239 1833 1833 1833 1299 8308
192.168.1.1 11488 701 6453 786
192.168.1.1 11488 701 6453 1103 1103
192.168.1.1 11488 701 6762 9116 9116 9116 6888 6888
192.168.1.1 11488 701 6453 8297 6758
192.168.1.1 11488 701 5511 3215
192.168.1.1 11488 701 3561 5683 5551
192.168.1.1 11488 701 1239 1755 1273 8793 8793 8793
192.168.1.1 11488 701 5705 5693
See show ip bgp neighbors paths.
See show bgp ipv6 neighbors paths.
Use to display prefix-list outbound route filters received from the neighbor.
Field descriptions
seq Sequence number of the entry in the prefix list
permit, deny Condition statement for addresses matching the listed address
Example
192.168.1.158 192.168.1.1
192.168.1.158 192.168.1.1
0 inc.
0 IGP