Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 382

JUNOSe 11.1.x BGP and MPLS Configuration Guide
To display detailed information about MPLS interfaces:
host1:pe1#show mpls interface detail
MPLS major interface ATM2/0.10
MPLS minor interface pe1-to-pe2 (transmit)
MPLS minor interface lsp-02020202-1-4 (receive)
346
Monitoring MPLS Interfaces
RSVP
Enabled with profile default
Authentication is disabled
Authentication key: <none>
Hellos are on with an interval of 10000 and miss limit of 4
Hello settings are not inherited
ATM circuit type is 1483 LLC encapsulation
Administrative state is enabled
Operational state is up
Operational MTU is 9180
MPLS major interface UID is 0x19000001
Lower interface UID is 0x0b000031
Uses platform label space
Peer IPv4 interface is ATM2/0.10 (UID 0x000000be)
No peer IPv6 interface
Upper IPv4 interface is ip19000001.mpls.ip (UID 0x000000bf, FEC index 0x0000003f)
No upper IPv4 VPN interface
No upper IPv6 interface
No upper IPv6 VPN interface
Condensed location is 0x00020000
Received:
0 packets
0 bytes
0 errors
0 discards
0 failed label lookups
Sent:
0 packets
0 bytes
0 errors
0 discards
RSVP
Enabled with profile default
Authentication is disabled
Authentication key: <none>
Stacked on MPLS major ATM2/0.10
Operational state is up
MPLS minor interface UID is 0x1a000001
Lower MPLS major interface UID is 0x19000001
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
Stacked on MPLS major ATM2/0.10
Operational state is up
MPLS minor interface UID is 0x1a000004
Lower MPLS major interface UID is 0x19000001
Statistics not enabled for this interface