Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 531

show ip vrf
show ip vrf detail
O- OSPF, E1- external type 1, E2- external type2,
N1- NSSA external type1, N2- NSSA external type2
Prefix/Length Type
--------------- -------
45.5.5.5/32 Connect
56.5.5.0/24 Connect
See show ip route.
Use to display brief information about the VRFs in this virtual router: The route
target of each VRF and the interfaces attached to each VRF.
Specify the VRF name to display the brief information only about that VRF. You
must be within the context of the virtual router to which the VRF belongs.
Field descriptions
VRF Name Name of each VRF
Default RD Default route distinguisher for the VRF
Interfaces Interfaces configured for the VRF
Examples
host1#show ip vrf
VRF Name Default RD
vpn1 1:1
vpn2 1:3
host1#show ip vrf vpn1
VRF Name Default RD
vpn1 1:1
See show ip vrf.
Use to display detailed information about the VRFs in this virtual router.
Specify the VRF name to display the brief information only about that VRF. You
must be within the context of the virtual router to which the VRF belongs.
Field descriptions
VRF Name of the VRF
Default RD Default route distinguisher for the VRF
VRF IP Router Id IP address that uniquely identifies the router
Default TTL Time to live value in the IP header
Chapter 5: Configuring BGP-MPLS Applications
Next Hop Dist/Met
---------- --------
45.5.5.5 0/1
56.5.5.5 0/1
Interfaces
null0
atm4/0.77
null0
fastEthernet3/0
atm4/0.21
Interfaces
null0
atm4/0.77
Monitoring BGP/MPLS VPNs
Intf
------------
fastEthernet3/0
atm4/0.21
495