Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual page 213

show ip bgp neighbors
show bgp ipv6 neighbors
path attribute entries Number of distinct path attributes stored in BGP's
internal path attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in its internal
path attribute table and share it between the two routes to conserve memory.
Prefix Prefix for the routing table entry
Peer IP address of BGP peer
Next-hop IP address of the next hop
MED Multiexit discriminator
CalPrf Calculated preference
Weight Assigned path weight
Origin Origin of the route
Example
host1#show ip bgp 12.2.0.0 255.255.0.0 longer-prefixes
Local router ID 192.168.1.153, local AS 100
72074 paths, 72074 distinct prefixes (5189328 bytes used)
72074 paths selected for route table installation
21685 path attribute entries (2965327 bytes used)
Prefix Peer
> 12.2.6.0/24 10.5.0.48
> 12.2.7.0/24 10.5.0.48
> 12.2.76.0/24 10.5.0.48
> 12.2.88.0/22 10.5.0.48
> 12.2.97.0/24 10.5.0.48
> 12.2.99.0/24 10.5.0.48
> 12.2.109.0/24 10.5.0.48
> 12.2.169.0/24 10.5.0.48
See show ip bgp.
See show bgp ipv6.
Use to display information about BGP neighbors.
Field descriptions
BGP neighbor ID BGP identifier of the BGP neighbor
remote AS Remote AS of the BGP neighbor
Description Textual description of the BGP neighbor
Member of peer group Name of the peer group of which this BGP neighbor
is a member
Remote router ID Router ID of the remote router
Chapter 1: Configuring BGP Routing
Next-hop MED CalPrf Weight
10.5.0.48 100
10.5.0.48 100
10.5.0.48 100
10.5.0.48 100
10.5.0.48 100
10.5.0.48 100
10.5.0.48 100
10.5.0.48 100
Monitoring BGP
Origin
100 IGP
100 IGP
100 IGP
100 IGP
100 IGP
100 IGP
100 IGP
100 IGP
177