Create An Advanced Port-Based Vlan - NETGEAR Nighthawk SX10 Pro Gaming User Manual

Nighthawk SX10 Pro Gaming Advanced 8-Port Gigabit Ethernet Switch Model GS810EMX
When you activate the Advanced Port-Based VLAN mode, VLAN 1 is added to the switch
and all ports are made members of VLAN 1. This is the default VLAN in the Advanced
Port-Based VLAN mode.
To activate the Advanced Port-Based VLAN mode:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The QOS page displays.
5. From the menu on the left, select VLAN.
The VLAN page displays.
6. In the Advanced Port-Based VLAN section, click the ACTIVATE MODE button.
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the CONTINUE button.
Your settings are saved and the pop-up window closes. By default, VLAN 1 is added
and all ports are members of VLAN 1.
For information about creating an advanced port-based VLAN, see Create an
Advanced Port-Based VLAN on page 53.

Create an Advanced Port-Based VLAN

An advanced port-based VLAN configuration lets you create VLANs and assign ports
on the switch to a VLAN. The number of VLANs is limited to the number of ports on the
switch. In an advanced port-based VLAN configuration, one port can be a member of
multiple VLANs.
By default, all ports are members of VLAN 1, but you can change the VLAN assignment.
To create an advanced port-based VLAN and assign ports as members:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
Use VLANS for Traffic
Segmentation
53 User Manual