Logging Port; Logging Syslog; Show Logging - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

15.3.6 logging port

This command sets the local port number of the LOG client for logging messages. The
can be in the range from 1 to 65535.
<portid>
Default
Format
Mode
15.3.6.1 no logging port
This command resets the local logging port to the default.
Format
Mode

15.3.7 logging syslog

This command enables syslog logging.
Default
Format
Mode
15.3.7.1 no logging syslog
This command disables syslog logging.
Format
Mode

15.3.8 show logging

This command displays logging.
Format
Mode
Client Local Port
Console Logging
Administrative
Mode
15-24
514
logging port <portid>
Global Config
no logging port
Global Config
disabled; local0
logging syslog
Global Config
no logging syslog
Global Config
show logging
Privileged EXEC
The port on the collector/relay to which syslog messages are
sent.
The mode for console logging.
v1.0, February 2007
System Maintenance Commands