NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual page 262

Layer-2 switches, software version 6.0
Hide thumbs Also See for GSM7212 - ProSafe Switch:
Table of Contents

Advertisement

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Dot1x Statistics
Time Since
Counters Last
Cleared
If you specify the
15-12
RSTP BPDUs Received - Rapid Spanning Tree Protocol
Bridge Protocol Data Units received
MSTP BPDUs Transmitted - Multiple Spanning Tree Proto-
col Bridge Protocol Data Units sent
MSTP BPDUs Received - Multiple Spanning Tree Protocol
Bridge Protocol Data Units received
EAPOL Frames Received - The number of valid EAPOL
frames of any type that have been received by this authentica-
tor.
EAPOL Frames Transmitted - The number of EAPOL
frames of any type that have been transmitted by this authen-
ticator.
The elapsed time, in days, hours, minutes, and seconds since
the statistics for this port were last cleared.
value, the following information appears:
switchport
Octets Received - The total number of octets of data received
by the processor (excluding framing bits but including FCS
octets).
Total Packets Received Without Error- The total number
of packets (including broadcast packets and multicast pack-
ets) received by the processor.
Unicast Packets Received - The number of subnetwork-uni-
cast packets delivered to a higher-layer protocol.
Multicast Packets Received - The total number of packets
received that were directed to a multicast address. Note that
this number does not include packets directed to the broad-
cast address.
Broadcast Packets Received - The total number of packets
received that were directed to the broadcast address. Note
that this does not include multicast packets.
Receive Packets Discarded - The number of inbound pack-
ets which were chosen to be discarded even though no errors
had been detected to prevent their being deliverable to a
higher-layer protocol. A possible reason for discarding a
packet could be to free up buffer space.
v1.0, February 2007
System Maintenance Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents