NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual page 284

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
3.0.3.4 Command
set igmp maxresponse <1-3599>
set igmp mctrexpiretime <0-3600>
snmp-server enable traps
snmp-server enable traps bcaststorm
snmp-server enable traps linkmode
snmp-server enable traps multiusers
snmp-server enable traps stpmode
speed all 1000 full-duplex
set igmp
A-2
5.0.1.9 (or newer) Equivalent Command
ip igmpsnooping maxresponse <1-3599>
ip igmpsnooping minresponse <1-3599>
snmp-server traps
snmp-server traps bcaststorm
snmp-server traps linkmode
snmp-server traps multiusers
snmp-server traps stpmode
(replaced by interface range command)
ip igmpsnooping
Command Changes from Release 3 to Release 5
v1.0, February 2007