NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual page 40

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Network
Configuration
Protocol Current
Java Mode
Web Mode
3-4
Indicates which network protocol is being used. The options
are bootp | dhcp | none.
Specifies if the switch should allow access to the Java applet
in the header frame. Enabled means the applet can be viewed.
The factory default is disabled.
Specifies if the switch should allow access to the Web Inter-
face.
v1.0, February 2007
Administrative Access Commands