NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual page 32

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Table 2-6 explains how to enter or exit each command mode.
Table 2-6. CLI Mode Access and Exit
Command Mode
User EXEC
Privileged EXEC
Global Config
VLAN Config
Interface Config
Line Config
Policy-Map
Config
Policy-Class-Map
Config
Class-Map
Config
Router OSPF
Config
Router RIP
Config
MAC Access-list
Config
DHCP Pool
Config
Stack Global
Config Mode
2-8
Access Method
This is the first level of access.
From the User EXEC mode, enter
enable.
From the Privileged EXEC mode, enter
configure.
From the Privileged EXEC mode, enter
vlan database.
From the Global Config mode, enter
interface <slot/port>.
From the Global Config mode, enter
lineconfig.
From the Global Config mode, enter
policy-map.
From the Policy Map mode enter
class.
From the Global Config mode, enter
class-map.
From the Global Config mode, enter
router ospf.
From the Global Config mode, enter
router rip.
From the Global Config mode enter
mac access-list extended
<name>.
From the Global Config mode, enter
ip dhcp pool <name>.
From the Global Config mode, enter the
stack command.
v1.0, February 2007
Exit or Access Previous Mode
To exit, enter logout.
To exit to the User EXEC mode, enter
exit or press Ctrl-Z.
To exit to the Privileged EXEC mode,
enter exit, or press Ctrl-Z.
To exit to the Privileged EXEC mode,
enter exit, or press Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Policy Map mode, enter
Privileged
exit. To return to the
EXEC
mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter exit. To return to the Privileged
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter the exit command. To return
to the Privileged EXEC mode, enter
Ctrl-Z.
Overview